New Trailer in the Works – Part 6

This entry is part 6 of 18 in the series Trailer Assembly

Working on adding a tongue jack so I don’t have to lift this thing up to put it on the hitch!

I saw a tip on another site showing how they mounted the jack. Just putting it on the frame per directions is pretty wobbly. First I added four 1/2″ washers between the wheel and the sides, there is a ton of slop in there I did not like. Then I cut a 4″x4″ to fit inside the frame, just like the original bracket does. Drilled a couple holes, and mounted it on with some 3/8″ hex bolts.

Going to paint a few things up first though.

Series Navigation<< New Trailer in the Works – Part 5New Trailer in the Works – Part 7 >>
Posted in Equipment, SMLC and tagged , .

Leave a Reply