Wheels! After a lot of work on, smoothing the gouges in the axle, (Hammer or chisel getting old bearing off?) enough to get the new bearings back on, packing the bearings, making the new hub fit the axle, then making the wheel fit the new hub, (The new hub is welded at the seat face,...
New Trailer in the Works – Part 6
Working on adding a tongue jack so I don’t have to lift this thing up to put it on the hitch! I saw a tip on another site showing how they mounted the jack. Just putting it on the frame per directions is pretty wobbly. First I added four 1/2″ washers between the wheel and...
New Trailer in the Works – Part 5
Worked on lighting today. Mounted the two side lights and two rear tail/brake lights. The brake lights mounted. The wiring diagram says to wire up these lights differently… I couldn’t do it that was because there are not enough wires. Will leave it loose for now and test it before completing. Running the wires down...